Bucher Municipal
V Range
117
JVM
V50 • V65 • V80 Operator’s Guide
Should a fault occur in any of the equipment operating systems the fault icon (!) is
displayed over soft key F2.
Selecting F2 automatically opens Menu 4.2 (CANbus Network) which highlights the
location of the aected Node.
Menu 4.03 - CANbus Network Faults
Rotate the encoder to highlight the indicated area.
Press the encoder to display the fault.
Menu 4.02.4 - Powapak IO Node
Example:-
Should a fault occur it will be accompanied by one or more emergency codes (EMCY),
which will be logged in the system. Shutting down the system will clear the error.
SYSTEM FAULTS
To Next Page
Loading...