Bucher Municipal
V Range
91
Optional Equipment
V50 • V65 • V80 Operator’s Guide
This feature utilises special water jets situated at the front of the hopper (A) and in the roof top duct
(B).
When the Easiclean system is connected to a high pressure water supply or hydrant, the spray jets
are highly effective in assisting the wash down process at the end of a shift.
Using the system
After the load has been discharged, lower the body to rest on the prop.
With the rear door open, connect the offside water coupling (C) to a high pressure supply or hydrant.
Flush the hopper and inlet duct to remove the bulk of the debris.
Complete the wash down process using the high pressure wash down equipment.
Please refer to the “End of day cleaning” in the Operation section.
EASICLEAN SYSTEM
CAUTION
Do not use at temperatures below 5 degrees C as the water could freeze in the pipe
work and system.
To Next Page
Loading...