Bucher Municipal
V Range
Routine Maintenance
139
V50 • V65 • V80 Operator’s Guide
Forward Facing Sweepgear - Nozzle Adjustment
CAUTION
The use of Needle stick gloves is recommended when working with this equipment.
Suction tube intake settings A
(1) Suction intake in lowered position parallel to ground
(1a) Position adjuster screw
(2) Suction tube in raised and locked position, parallel to the ground
(2a) Position adjuster screw
Suction tube intake settings B
(3) Sweeping system retracted and locked
(3a) The channel brush must not protrude beyond the rear axle mudguard.
(3b) Position adjuster screw
(4) Sweeping system in extended position
(4a) Position adjuster screw
To Next Page
Loading...