Bucher Municipal
V Range
Operation
65
V50 • V65 • V80 Operator’s Guide
JCB 97kW S5 Engine only
Due to increased exhaust temperatures, the 97kW may be required to go through a 2
minute forced idle process on engine shutdown. This will be automatically requested
through the JVM when required once the engine is switched off, using the ignition
switch on the centre console. A prompt will show this is in process and how long is left.
WARNING
If the engine is shut down using the chassis ignition, it will not run on for two
minutes and this could potentially damage the DPF system on the engine.
To Next Page
Loading...