Basic functions
6
Logamatic 2107 controls - We reserve the right to make any changes due to technical modifications. 25
Entering the room temperature (heating zones without remote control)
If your room temperature is too high, reduce the temperature.
If your room temperature is too low, increase the temperature.
+
Press and hold down the "Heating zone" key and turn the dial until the heating
zone without remote control appears on the display.
Press "Day mode".
The display contains "MANUAL", the day, the time and the room temperature for
normal heating mode (day mode).
+
Hold down the "Temp" key and turn the dial until you reach the desired day
temperature (in this case "71°F").
The day room temperature is now adjusted to 71°F.
Release the "Temp" key to store your input.
Press "AUT" to select automatic mode.
USER NOTE
To set the room temperature for night mode, simply repeat the process
described above, in this case pressing the "Night mode" key, rather than the
"Day mode" key.
To Next Page
Loading...
Need help?
General
