Extended functions
7
Logamatic 2107 controls - We reserve the right to make any changes due to technical modifications.30
7.2 Selecting the standard program
What is a heating program?
A heating program automatically switches between normal heating mode (day)
and setback heating mode (night mode) at preset times. This automatic
changeover is implemented using the internal clock.
Please consider the following points before using these options:
– What time do you want day mode to start (and which days of the week)?
– Are there days when you don't need to heat during the day?
– When in the evening can you switch to night mode?
The time taken for your heating system to reach the desired temperature may
vary. It will depend on the outdoor temperature, the building insulation and the
drop in room temperature.
With the Logamatic 2107 controls, Buderus offers eight different preset heating
programs (see chapter "Summary of standard programs" page 31). These can
be used independently for the 1st and 2nd heating zones.
The "FAMILY" heating program (see chapter "Summary of standard programs")
is preset at the factory.
If none of the preset heating programs suits your lifestyle, you can also create
your own heating programs.
AUTOMATIC
11.15am
72
USER NOTE
The DHW heating is activated when you set "DHW AUTO" operating mode
and while one or both heating zone is in "day mode".
To Next Page
Loading...
Need help?
General
