BFU remote control
8
Logamatic 2107 controls - We reserve the right to make any changes due to technical modifications. 41
8 BFU remote control
A BFU (accessory) remote control allows you to easily
control your heating system from your living space.
8.1 General information on the BFU
The remote control is equipped with different functions.
If the vacation program is active, only the "AUT" key LED
lights up.
For the room temperature control to work perfectly, all
the thermostatic valves in the room containing the
remote control or the external room temperature sensor
must be fully open at all times.
The remote control should not be exposed to the direct
influence of other external heat sources, e.g. lamps,
televisions, sunlight or open doors or windows.
8.2 Normal heating mode (day mode)
Set the room temperature for normal heating mode (day
mode) as follows:
z Turn the dial (Fig. 11, Item 1) to the desired day-time
room temperature, e.g. 70°F (21°C).
The setting range is 52 – 86°F (11 – 30°C).
If your heating contractor activated the "room
temperature compensation" function, any temperature
fluctuations that are signaled by the room temperature
sensor (in the remote control or external) to the
electronic controls are automatically compensated by
raising or lowering the boiler water temperature.
Fig. 11 Remote control
Item 1: Dial
1
To Next Page
Loading...
Need help?
General
