Advanced programming options
9
Logamatic 2107 controls - We reserve the right to make any changes due to technical modifications. 53
9.3 Creating a new heating program
You can also set up a new heating program that is tailored entirely to your
personal requirements. The new heating program is stored under the name
"OWN PROGRAM 1".
Enter switching points for, in this case "Monday".
Make a note of your custom program.
z Open flap.
AUTOMATIC
11.15am
71
+
Hold down the "Heating zone" key and turn the dial until "CIRCUIT 1" is
displayed.
Release the "Heating zone" key.
+
Hold down the "PROG" key and turn the dial until the "NEW" standard program
is displayed.
The "NEW" standard program has now been selected.
Release the "PROG" key.
"NEW SP", dashes and "7" for Sunday, for example, immediately appear in the
display.
+
Hold down the "Day" key and turn the dial until the desired day of the
week 1 … 7 appears, e.g. "1" for Monday.
Release the "Weekday" key.
+
Hold down the "Time" key and turn the dial until the desired time for the new
switching point appears, e.g. "5.00am".
Release the "Time" key.