Buderus Logamatic 2107 User Manual

Advanced programming options
9
Logamatic 2107 controls - We reserve the right to make any changes due to technical modifications.54
+
Hold down the "Day" key and turn the dial until the room temperature for normal
heating mode appears, e.g. "71°F" (21°C).
Release the "Temp" key. The switching point is stored.
The switching point is stored under "OWN PROG 1" for heating circuit 1.
"NEW SP", dashes and "7" for Sunday, for example, immediately appear in the
display.
71
NEW SP
°F
5.00am
1
---
NEW SP
°F
--:--
7
USER NOTE
Enter all the other the switching points for other days in the order described
above (specifying the day, time and temperature).
Press the "AUT" key to return to the standard display.

Buderus Logamatic 2107 Specifications

General

Category	Control Systems
Type	Heating Control Unit
Voltage	230 V
Frequency	50 Hz
Protection class	IP20
Ambient temperature	0°C
Application	Heating systems