Buderus Logamatic EMS RC35 Installation And Service Instructions

System settings (Service menu – Settings)
Logamatic EMS RC35 programming unit - Subject to technical modifications
38
6
Should the LED of the single
charge key be activated?
yes, no yes The heating once only function
is retained, but is no longer
indicated by the LED.
5)
Start delay for preheated
DHW (e.g. solar):
OFF,
1 sec. to 50 sec.
OFF This function depends on the
boiler used.
1) Not possible or available on boilers with UBA1.x, UBA-H3 or DBA.
2) Not possible or available on boilers with UBA1.x or DBA.
3) On boilers with UBA-H3 subject to the availability of the PZ output (e.g. with module LM10).
4) Subject to the boiler in use, the temperature is permanently fixed an cannot be modified.
5) Not possible or available on boilers with UBA1.x.
Menu item Input range
Factory
setting Other information
Tab. 14 Navigator for service menu SETTINGS\DHW

Buderus Logamatic EMS RC35 Specifications

General

Brand	Buderus
Model	Logamatic EMS RC35
Category	Controller
Language	English