Key to symbols and safety instructions
Logamatic EMS RC35 programming unit - Subject to technical modifications
6
1
1.2 Safety instructions
Installation and commissioning
B Observe these instructions to ensure correct operation.
B The appliance must only be installed and commissioned by an authorised installer.
Risk to life from electric shock
B The power supply must be connected by a qualified electrician.
B Observe the connection diagram.
B Before installation: isolate all poles of the power supply (230 V AC). Secure against unintentional
reconnection.
B Never install this appliance in wet rooms.
B Never connect this appliance to the 230 V mains.
Risk of damage due to operator error
Operator errors can lead to injuries and/or material losses.
B Ensure that children never operate this appliance unsupervised or play with it.
B Ensure that only individuals who can operate this appliance correctly have access to it.
Warning: frost
The heating system can freeze up in cold weather if it is not in operation.
B Leave the heating system permanently switched on.
B Enable frost protection.
B In case of faults: immediately remedy the fault.
To Next Page
Loading...
Need help?
General
