Buell 2005 FIREBOLT - Page 188

2005 Buell Firebolt: Engine 3-27
HOME
37. Once engine has been removed from vehicle finish
removing the following items as required:
a. Shifter assembly.
b. See Figure 3-28. Center tie bar mount.
c. See Figure 3-29. Swingarm pivot shaft pinch bolt
threaded insert.
d. See Figure 3-30. Aluminum bushings from front
exhaust mount.
e. Timer cover.
Figure 3-28. Center Tie Bar Mount
Figure 3-29. Removing Threaded Insert
8725
8724
8729
Figure 3-30. Front Exhaust Mount Bushings (2 piece)
Left Side
Right Side
8718
8727