2005 Buell Firebolt: Engine 3-43
HOME
36. See Figure 3-58. Connect throttle cables (5) to induction
module/throttle body.
37. Connect the following sensors:
a. Temperature sensor [90] (3).
b. Oxygen sensor [137] (Install cable strap on harness)
(4).
38. Install the ignition coil (1) and spark plug wires and con-
nect [83] (2). Tighten ignition coil fasteners to 120-144
in-lbs (13.6-16.3 Nm).
Figure 3-58. Electrical Connections and Throttle Cables (Typical)
1. Ignition coil
2. Coil connection [83]
3. Cylinder head temperature sensor connection [90]
4. Oxygen sensor connection [137]
5. Throttle cables
5
3
2
1
10647
4
To Next Page