Buell P3 2003 - Windscreen

2-66 2003 Buell P3: Chassis
HOME
WINDSCREEN 2.26
REMOVAL
1. See Figure 2-111. Remove two screws and nylon wash-
ers on each side.
2. Remove windscreen.
3. See Figure 2-112. Remove windscreen trim.
4. Remove windscreen mounting brackets.
INSTALLATION
1. If removed, install both windscreen brackets. See 7.17
HEADLAMP.
2. Verify trim is installed on windscreen.
3. See Figure 2-111. Install two screws and nylon washers
on each side. Tighten screws to 9-11 in-lbs (1-1.2 Nm).
Figure 2-111. Remove Screws
Figure 2-112. Windscreen Trim
3779
3797