Buffalo LinkStation - Network

Chapter 4 Web Admin interface
LinkStation User Manual 124
Name
Descriptions
Local Groups
Local Groups Displays [Group Name], [Group Id], and [Description].
To create a new group, click [Create Group].
To edit a group, select it and click [Edit Group].
To delete a group, select it and click [Delete].
Note: Enter a letter in the [Find] eld and groups beginning with that
letter are displayed. Click on a group name in the list to select the group.
Local Groups
> New Group
To display, click
[Create Group]
on the Group
Screen.
Group Name Group names may contain up to 20 bytes(UTF-8). Alphanumeric
characters, hyphens, underscores, and periods may be used. Do not
use multi-byte characters. Do not use a symbol as the rst character of a
group name.
Group Id If Group ID is left blank, a group ID will be automatically assigned. When
using the Quota feature, use numbers between 1000 and 1999 to set a
group ID manually. Make sure that the group ID does not duplicate to
other groups.
Description Group descriptions may contain up to 75 bytes(UTF-8). Alphanumeric
characters, multi-byte characters, hyphens, underscores, and spaces may
be used.
Do not use a space as the rst character in a description.
Group Quota To use a quota to restrict the space which is available for a group, click
[Enable].
Hard
Limit(GB)
Set space to be available for use (in GB).
* Quota feature only restricts the available hard drive space. This feature
does not show the space that each group is currently using; It should be
managed by individual group. To verify the owner, open the new window
and click [Owner] tab by selecting [Security] tab on [Properties] screen for
each le or folder and click [Advance Settings] button. (The steps to check
the owner may very depending on OS. The example above shows for
Windows XP).
Local Users/
Group Members
Local Users To add a user to the group, select the user and click [Add].
Note: Domain Users from the Domain Controller cannot be added to
groups here.
Group
Members
Displays users who are registered to a group. To unregister a user, select
the user and click [Remove].