Buffalo LinkStation - Page 128

Chapter 4 Web Admin interface
LinkStation User Manual 127
Name
Descriptions
Workgroup/Domain
Click [Modify Settings]
to change settings.
Active Directory
Domain Name
(DNS/Realm Name)
Enter [Active Directory Domain Name (DNS/Realm Name)]
when selecting [Active Directory] as a method to join the
network.
* You can enter up to 255 bytes(UTF-8). Do not use multi-byte
characters.
* Alphanumeric characters, -(hyphen), _(underscore), and .(dot)
may be used.
Active Directory
Domain Controller
Name
Enter [Active Directory Domain Controller Name] to use [Active
Directory].
* You can enter up to 63 bytes(UTF-8). Do not use multi-byte
characters.
* Alphanumeric characters, -(hyphen), and _(underscore) may
be used.
* Do not use a symbol as the rst character.
Administrator
Name
Enter the Administrator account username for [Administrator
Name].
* This must be entered if [NT Domain] or [Active Directory] is
selected for [Authentication Method].
* You can enter up to 256 bytes(UTF-8). Do not use multi-byte
characters.
* Alphanumeric characters, -(hyphen), _(underscore), and .(dot)
may be used.
* Do not use a symbol as the rst character.
Administrator
Password
Enter [Administrator Password].
* This must be entered if [NT Domain] or [Active Directory] is
selected for [Authentication Method].
* You can enter up to 256 bytes(UTF-8). Do not use multi-byte
characters.
* Alphanumeric characters, -(hyphen), and _(underscore) may
be used.
* Do not use a symbol as the rst character.