Buffalo LinkStation - Page 29

Using your LinkStation
LinkStation User Manual 28
3
4
5
6
7 Click [Save].
You have assigned access restrictions.
• If you log on from a Microsoft Network Domain, you can set the [Access Restrictions] with the users
and/or groups which are registered on the domain.
• If both [Read only] and [Read & Write] permissions are given to a user, that user will have read-only
access.
Click [Add].
Note: The procedure described here shows how to
set access restrictions for users. To set access
restrictions for a group of users, click [Local
Groups] - [Add].
1 Check the users (or groups) that you want to
permit to access the share.
.
2 Click [Add].
Select the level of access for the user or group you
added.
Check [Access Restrictions] to enable.