Buffalo LinkStation - RAID Scanning

Using your LinkStation
LinkStation User Manual 83
• Changing to Normal mode
1
2
3
Click [Delete RAID Array].
4
When [Are you sure you want to change RAID mode?] is displayed, click [Apply].
5
The [Confirm Operation] screen will appear. Enter the number shown in the [Confirmation
Number] eld within 60 seconds, and click [Apply].
6
Follow the instructions displayed on the screen.
You have congured Normal mode. Turn to page 24 to create a shared folder.
Click [System] - [Storage] - [RAID Array] in the Web
Admin interface.
Click the array you want to set.