3.5.1.2 Removal
4.
Swivel the locking levers [2] (left and right side) upwards and press until they audibly
click into place.
5. Check that the side panel is firmly in place by jiggling the top edge of the panel to and
fro.
6. Repeat steps 1 to 5 with the remaining three side panel sections.
Loosen the locking levers to release the side panels.
1.
Use a finger to pull the orange safety lock of the locking lever [1] outwards and keep
holding it in this position.
Assembling the Care Bed
20 Part B: Operator and Technical Personnel
To Next Page
Loading...
