Busch-Jaeger Busch-Timer 6455 - Page 26

Operating Instructions
Busch-Timer
®
Operation
Operating Instructions | 1473-1-8164
— 26 —
Sequence of operating steps
Button
Display
Entry / Comments
Switching times
- Press the menu button to switch to the setting mode.
Special functions
- Select menu "Special functions" via the arrow buttons.
Additional switching
times
- Press the OK button.
Menu item "Additional switching times" is displayed.
Duration of down
movement
- Select menu item "Duration of down movement" via the arrow buttons.
Switching times of
duration of down
movement
3:00
- Confirm your selection with the OK button.
You simultaneously switch to the next menu item "Return pulse switching times".
The preset duration of down movement flashes.
1 30
- Set the duration of down movement via the arrow buttons.
In this example a duration of down movement of 1 minute and 30 seconds has been set.
The following menu item is displayed only if "Additional switching times" has been activated.
Additional switching
times for duration of
down movement
3:00
- Confirm your selection with the OK button.
You simultaneously switch to the next menu item "Additional switching times for duration of
down movement".
The preset duration of down movement flashes.
2 30
- Set the duration of down movement via the arrow buttons.
In this example a duration of down movement of 2 minute and 30 seconds has been set.
The following menu items are displayed only if a brightness sensor has been connected.
Duration of down
movement at twilight
3:00
- Confirm your entry with the "OK" button.
You simultaneously switch to the next menu item "Duration of down movement at twilight".
The preset duration of down movement flashes.
1 00
- Set the duration of down movement via the arrow buttons.
In this example a duration of down movement of 1 minute has been set.
Duration of down
movement for sun
protection
3:00
- Confirm your entry with the "OK" button.
You simultaneously switch to the next menu item "Duration of down movement for sun
protection".
The preset duration of down movement flashes.
2 00
- Set the duration of down movement via the arrow buttons.
In this example a duration of down movement of 2 minute has been set.
Special functions
- Confirm your entry with the "OK" button.
You simultaneously switch to menu "Special functions".
- Press the menu button to switch to the operating mode.
Pos: 85 / #Ne ustr ukt ur# /Onl in e-Do kume ntati on (+ KNX) /S teuer mod ul e - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ 3224213214 @ 1