BWT AQA Perla User Manual

1313
1313
13
1313
1313
13
GBGB
GBGB
GB
2222
2222
22
00
00
0
Sodium contentSodium content
Sodium contentSodium content
Sodium content
Increase by 180 mg/lIncrease by 180 mg/l
Increase by 180 mg/lIncrease by 180 mg/l
Increase by 180 mg/l
Set water hardnessSet water hardness
Set water hardnessSet water hardness
Set water hardness
The drinking water hardness as measured on the
spot and the desired blended water hardness
(residual hardness) must be entered here.
The raising of the sodium content is displayed in
accordance with the hardness setting.
ININ
ININ
IN Drinking water hardness
Enter hardness reading for drinking water.
Correct figures
Confirm
OUTOUT
OUTOUT
OUT Blended water hardness
Enter desired blended water hardness (residual
hardness). (BWT recommendation 4° - 8° dH. In
Austria a residual hardness of > 8.4 °dH is
prescribed).
Confirm
66
66
6
Any SanitaryAny Sanitary
Any SanitaryAny Sanitary
Any Sanitary
2020
2020
20
0815 12345670815 1234567
0815 12345670815 1234567
0815 1234567

BWT AQA Perla Specifications

General

Brand	BWT
Model	AQA Perla
Category	Water Dispenser
Language	English