BWT AQA Perla User Manual

2222
2222
22
GBGB
GBGB
GB
Technical work is reserved for Customer Service
(password-protected)
Setting options in Unit Setup:Setting options in Unit Setup:
Setting options in Unit Setup:Setting options in Unit Setup:
Setting options in Unit Setup:
Alarm:Alarm:
Alarm:Alarm:
Alarm: Alarm signal on/off
Online measuring:Online measuring:
Online measuring:Online measuring:
Online measuring: Not yet available
Aquastop:Aquastop:
Aquastop:Aquastop:
Aquastop: Not yet available
Pressure switch:Pressure switch:
Pressure switch:Pressure switch:
Pressure switch: Option, if no water pressure is
present, no regeneration will be triggered.
Rinse/hygiene:Rinse/hygiene:
Rinse/hygiene:Rinse/hygiene:
Rinse/hygiene:
RR
RR
R: Rinse function = additional rinse with soft
water. Not recommended for HVACR systems.
HH
HH
H: Hygienic rinsing after 24 hours without water
flowing through (1 min, both exchanger
columns).
R+HR+H
R+HR+H
R+H: Both functions active.
Once setting is complete press ConfirmOnce setting is complete press Confirm
Once setting is complete press ConfirmOnce setting is complete press Confirm
Once setting is complete press Confirm
1.
2.

BWT AQA Perla Specifications

General

Brand	BWT
Model	AQA Perla
Category	Water Dispenser
Language	English