BWT AQA Perla User Manual

1717
1717
17
1717
1717
17
GBGB
GBGB
GB
OperationOperation
OperationOperation
Operation
Please note separate operating instructions for
Multiblock Module and DN 32/32 Connection Set.
For regular regenerations (after volume control or
time-priority control) an additional disinfection is
not necessary.
Under unfavourable circumstances, e.g. longish
down times in warm installation rooms, an additional
disinfection operation by the customer service
may become necessary for regeneration pur-
poses.
11
11
1
Initiating regeneration manuallyInitiating regeneration manually
Initiating regeneration manuallyInitiating regeneration manually
Initiating regeneration manually
22
22
2
Column exchangeColumn exchange
Column exchangeColumn exchange
Column exchange
33
33
3
Cancel regenerationCancel regeneration
Cancel regenerationCancel regeneration
Cancel regeneration
44
44
4
Execute commissioning rinseExecute commissioning rinse
Execute commissioning rinseExecute commissioning rinse
Execute commissioning rinse
(for more information see Commissioning)
The individual regeneration stages are displayed
together with the remaining time available.
The regeneration is automatically adjusted toThe regeneration is automatically adjusted to
The regeneration is automatically adjusted toThe regeneration is automatically adjusted to
The regeneration is automatically adjusted to
the incoming water pressure and lasts aboutthe incoming water pressure and lasts about
the incoming water pressure and lasts aboutthe incoming water pressure and lasts about
the incoming water pressure and lasts about
17 minutes.17 minutes.
17 minutes.17 minutes.
17 minutes.
Call up Data acquisition
11
11
1
22
22
2
33
33
3
44
44
4

BWT AQA Perla Specifications

General

Brand	BWT
Model	AQA Perla
Category	Water Dispenser
Language	English