To Next Page

To Previous Page

2525

GBGB

RemedyRemedy

Remedy

Replenish with regenerant and

press OK key until Salt

deficiency disappears.

Replenish with regenerant,

Press OK key till Salt deficiency

disappears. Wait 3 hours for

brine to form and trigger

regeneration manually for both

exchanger columns in

succession.

Restore electricity connection.

Set according to Com-

missioning section “Setting of

blended water hardness”.

Raise primary pressure (if

necessary, set pressure

reducer) and trigger Manual

regeneration.

Repeat Commissioning rinse.

If the fault cannot be remedied with the aid of these instructions, our Factory CustomerIf the fault cannot be remedied with the aid of these instructions, our Factory Customer

If the fault cannot be remedied with the aid of these instructions, our Factory Customer

Service must be consulted, giving the serial and production number (see nameplate on theService must be consulted, giving the serial and production number (see nameplate on the

Service must be consulted, giving the serial and production number (see nameplate on the

back of the unit).back of the unit).

back of the unit).

roubroub

roub

leshootingleshooting

leshooting

FaultFault

Fault

Salt deficiency is displayed.

Unit supplies no soft or blended

water.