BWT AQA Perla User Manual

2020
2020
20
GBGB
GBGB
GB
Pour in regenerantsPour in regenerants
Pour in regenerantsPour in regenerants
Pour in regenerants
Replenish regenerants at the latest when the sieve
tray (
55
55
5) becomes visible or when the message
salt deficiencysalt deficiency
salt deficiencysalt deficiency
salt deficiency is displayed. Any commonly
available regenerative salts (salt tablets complying
with DIN EN 973 type A, e.g. Clarosal or Sanisal/
Sanitabs) may be used.
Open protective hood
(2)(2)
(2)(2)
(2). Pour regenerants into
the storage chamber (
33
33
3).
Press key until the
salt deficiency salt deficiency
salt deficiency salt deficiency
salt deficiency display
disappears.
After a salt deficiency the first two regenerations
are prolonged by 5 minutes.
The replenishment must be done in such a way
that no contaminants get into the storage chamber
(
33
33
3) (clean regenerant packaging before use if
necessary).
If contaminants appear in the storage chamberIf contaminants appear in the storage chamber
If contaminants appear in the storage chamberIf contaminants appear in the storage chamber
If contaminants appear in the storage chamber
(3) or brine chamber (6), the relevant chamber(3) or brine chamber (6), the relevant chamber
(3) or brine chamber (6), the relevant chamber(3) or brine chamber (6), the relevant chamber
(3) or brine chamber (6), the relevant chamber
mm
mm
m
ust be cleaned with drust be cleaned with dr
ust be cleaned with drust be cleaned with dr
ust be cleaned with dr
inking winking w
inking winking w
inking w
aterater
aterater
ater
..
..
.
Error messagesError messages
Error messagesError messages
Error messages
Error messages are displayed in red with aError messages are displayed in red with a
Error messages are displayed in red with aError messages are displayed in red with a
Error messages are displayed in red with a
brief description of what has happened.brief description of what has happened.
brief description of what has happened.brief description of what has happened.
brief description of what has happened.
Caution! If problems persist pull out the mainsCaution! If problems persist pull out the mains
Caution! If problems persist pull out the mainsCaution! If problems persist pull out the mains
Caution! If problems persist pull out the mains
plug and click the hand wheel on theplug and click the hand wheel on the
plug and click the hand wheel on theplug and click the hand wheel on the
plug and click the hand wheel on the
Multiblock Module shut (this opens the bypassMultiblock Module shut (this opens the bypass
Multiblock Module shut (this opens the bypassMultiblock Module shut (this opens the bypass
Multiblock Module shut (this opens the bypass
to the water supply).to the water supply).
to the water supply).to the water supply).
to the water supply).
Acknowledge errorAcknowledge error
Acknowledge errorAcknowledge error
Acknowledge error
If the error continues to be displayed,If the error continues to be displayed,
If the error continues to be displayed,If the error continues to be displayed,
If the error continues to be displayed,
call customer service.call customer service.
call customer service.call customer service.
call customer service.
ServiceService
ServiceService
Service
The
ServiceService
ServiceService
Service display appears after 500
regenerations or after 12 months.
Maintenance must be performed by BWT
Customer Service.
SerSer
SerSer
Ser
vicevice
vicevice
vice
66
66
6
22
22
2
33
33
3
Overflow channel 2Overflow channel 2
Overflow channel 2Overflow channel 2
Overflow channel 2

BWT AQA Perla Specifications

General

Brand	BWT
Model	AQA Perla
Category	Water Dispenser
Language	English