The car is a pure electric car that is driven with the energy provided by the power battery. In
order to avoid that the car is not driven due to the power loss of the power battery, it is very
important to charge the battery and calculate the power demand before driving.
The power battery can be charged with the three methods as follows:
1. Household single-phase AC charge
2. Charge post single-phase AC charge
3. Charge post DC charge
■ The time required to charge the power battery is based on the charge method,
remaining battery capacity, real-time temperature, usage time, ambient temperature
and etc. The data provided in the user manual may differ from the time required for
actual charge.
■ The charge requirements should be in accordance with GB/T18487.1-2015.
Household single-phase AC charge
■ AC charge connector device is a charge device that is delivered with the car; the car is
connected to the household standard 220V50Hz, 10A single-phase two-pole
grounding outlet to charge the power battery.
■ The power outlet should be the household outlet that can meet the national standard,
to avoid the line damage and the protection trip caused by high-power charge, which
may affect the normal use of other devices.
Charge post single-phase AC charge
■ Charge the power battery with an AC power charge post in a public place or delivered
with the car. For use of the charge device, please see the user manual or operation
instructions.
Charge post DC charge
■ Charge the power battery with a DC charge cabinet in a public place; the charge
cabinet is typically installed at a specific charge station.
To Next Page
Loading...
