4-5 Use of driver assistance functions
Panoramic image system (if fitted)
Press the “Panoramic view” button on
the steering wheel to enter the
panoramic view interface.
Configuration 1
■ Press the front, rear, right, or left
side of vehicle icon in the left zone
to display the individual front, rear,
right, or left view in the right view
zone.
■ In the individual front or right view,
double press the view zone to
switch over to 180˚ view in full
screen.
Press the sensor icon in the panoramic view to turn on the sensor display and press again
to turn off the sensor display. After the sensor display is turned on, at the approach of any
obstacle, an obstacle warning is displayed in the view.
Please pay attention to the
surrounding environment of vehicle
To Next Page
Loading...
