Emergency warning indicator switch
■ Press the hazard warning lamp
switch to synchronously flash the
turn signal indicator lamp on the
instrument and the hazard warning
lamp switch. Press it again to stop
the flashing.
● Turn on the emergency warning indicator to remind other pedestrians and cars to
avoid any risk.
Lighting adjustment switch group
The lighting adjustment switch group is
composed of headlamp adjustment
switch.
Headlamp adjustment
switch
■ This switch is used to adjust the
vertical illumination angle of the
headlamp. This switch is
operational after the low beam is
turned on.
■ The illumination height of the headlamp is the maximum when the headlamp
adjustment switch is at 0 position and is the minimum when the headlamp adjustment
switch is at 5 position. Depending on the driver’s need, adjust the switch to any of 0~5
positions to change the illumination height of the headlamp.
Mileage adjustment switch
■ Press the mileage switch repeatedly to circulate the mileage interfaces on the
instrument. Press and hold this button to reset mileage I or II.
To Next Page
Loading...
