“Remote Start Function” of the electronic smart key
Before start
1. Turn the power switch in “OFF” position;
2. Place the shift lever in “P” position;
3. Maintain the speed at less than 5km/h.
Start
1. Press and hold “Remote Start/Stop” button on the electronic remote key for 2s to start
the car; after the successful start, the turn signal will flash 3 times.
2. After the remote start is successful, if no valid operation is performed within 10min, the
car will be shutdown, the power switch will be turned to “OFF” position, and the turn
signal will flash twice;
3. After successful start, press and hold “Remote Start/Stop” button on the electronic
remote key for 2s, the car will be shutdown, the power switch will be turned to “OFF”
position, and the turn signal will flash twice.
To Next Page
Loading...
Need help?
General
