BYD S1 EV - Rear Charging Port (if Fitted); 12 V Standby Power Supply

5
Interior device
5-4 Other interior device
189
Rear charging port (if fitted)

One charging port is provided at the
rear of central control instrument
panel.

Operational only when the vehicle
power switch is at “OK” position.
12V standby power supply

It can be used to power any
accessory in working voltage of
DC12V and working current of no
higher than 10A.

To use the 12V standby power
supply, uplift the cap. It’s
operational only when the vehicle
power switch is at “OK” position.