EasyManua.ls Logo

BYD S1 EV - Smart Charge Function; Charging Port Electric Lock Control Function

BYD S1 EV
254 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
112
4-1 Charge device
Smart charge function
The car has a smart charge function, so the negative terminal of the battery cannot be
disconnected when your car is parked for a long time.
When the battery power is too low, it can be charged with the power battery.
Tip
An automatic start may occur during long-term storage of the car. It is a normal
control procedure for smart charge, but not a fault.
The electric energy for smart charge comes from the power battery, so SOC may be
reduced when the smart charge is performed, which is a normal phenomenon, but
not a fault.
Charging port electric lock control function
In order to prevent theft of the charge gun during charge or discharge process, the
charging port has an anti-theft function during charge and discharge process; the function
is activated by default and can be cancelled in the steps as follows:
Multimedia control (if fitted)
1. The user can press the [Settings] -
[Vehicle] - [Lock] on the multimedia
touchscreen to enter the relevant
setting interface.
2. Enter the “Charging port electric
lock immobilizer working mode”
and select the electric lock working
mode as “ON".
Dashboard control (if fitted)
1. Open the instrument menu, select
the vehicle settings interface, and
select “Charging port electric
immobilizer” function in the level-2
menu “Lock”.
Vehicle
Driving
Lighting
Sound effect
System
A/C
Windows
and doors
Lock
Exterior
Rearview Mirror
Lock
Automatic locking up before driving
ON
OFF
Remote unlocking mode
Driver side alone
Four-door
Electric locker anti-theft work
mode for charger
ON
OFF
Settings
Front
ON
High convenience
Information
Return
Outside 35
Inside 12
Lock
Windows
Illumination
Engine sound

Table of Contents

Related product manuals