1. Remove the headrest in the middle
of the rear seat (if fitted) and adjust
the seat headrests on both sides of
the rear seats to the lowest position.
2. Pull up the unlocking webbing on
the rear right seat cushion and flip
the seat cushion forward.
3. Pull up on the unlocking webbing
on the back seat backrest and fold
the backrest forward.
The left/rear right seats should be folded
in the same way. The seats should be
restored in the reverse of the above
steps.
● Before folding the backrest, must remove the middle headrest and flip the seat
cushion.
● When the seat cushion is restored, must press it down first to ensure that the seat
cushion is locked in place.
● When the rear seats are folded and restored, please gently handle the seat backrest
and seat cushion to avoid damage to the seatbelts on the rear seats and backrests
or causing any fault.
● When the seats are restored, must place the seatbelts on both sides on the backrest
and place the seatbelt buckles into the grooves on the seat cushions.
To Next Page
Loading...
Need help?
General
