1. Front and rear adjustment of the
seat
■ Hold the middle of the adjustment
handle and pull it up, then slide the
seat back and forth to the desired
position with a slight body pressure,
and release the adjustment handle.
■ After the front and rear position of
the seat is adjusted, slide the seat
back and forth to ensure that the
slide lock sound is sound and the
seat is locked in position.
2. Height adjustment mechanism
handle
Pull up the height adjustment
mechanism handle to adjust the seat to
a comfortable height. (Note: The front
passenger seat is not equipped with the
height adjustment mechanism).
■ Pull the height adjustment
mechanism handle up is to raise
the seat, and press it down to lower
the seat.
3. Backrest adjustment handle
Pull the handle up, tilt the seat backrest
forward or backward to adjust it to the
desired position and release the handle.
● When the seat cushion depth is measured, the front and rear position of the seat is
the limit positions of the slide rail, and the backrest has the design angle of 23°.
To Next Page
Loading...
Need help?
General
