4-6 Other main function descriptions
2. Push down the wiper blade locking
button and pull out along the
indicated direction.
3. Hold the wiper blade clip and take
out the wiper blade along the
shown direction.
4. While assembling new wiper
blades, operate in reverse
sequence of the disassembling
procedure.
Replace the rear wiper blade
1. Pull up the rear wiper arm from the rear windshield.
2. Turn the rear wiper blade to the
position as shown.
3. If the rear wiper blade is fitted with
the hook as shown at Position ,
press and hold it.
4. If the rear wiper blade is fitted with
the hook as shown at Position
, move the rear wiper blade in
the direction indicated by Position
, and remove it after completely
separating it from the hook.
■ If the rear wiper blade is not fitted with the hook, remove the wiper blade directly.
● After removing the wiper blade, gently put the wiper arm back on the windshield; do
not let the wiper arm in the air; otherwise the windshield may be broken.
The wiper blade can be installed in the reverse steps of the above ones.
To Next Page
Loading...
