Tire pressure fault warning indicator
■ When the power supply is in “OK” position, the warning indicator will be turned on. If
the tire pressure monitoring system is operated normally, the warning indicator will be
turned off after a few seconds. Thereafter, if the system is faulty, the warning indicator
will be turned on again.
■ When the tire pressure fault warning indicator is turned on or flashes, “Please check
the tire pressure monitoring system” is displayed on the dashboard, and “---” value is
displayed on the tire pressure display interface, it indicates that the tire pressure
system is faulty.
■ When the tire pressure fault warning indicator flashes rapidly and one or more values
on the tire pressure display interface of the dashboard are red, it indicates that the
corresponding tire is in a rapid leakage status.
■ When the tire pressure fault warning indicator is always on and the one or more values
on the tire pressure display interface of the dashboard are yellow, it indicates that the
corresponding tire is under low- voltage status.
In any of the above cases, it is recommended to contact BYD Auto Authorized Service
Station for inspection as soon as possible.
Seatbelt not-fastening indicator
The indicator is used to remind the driver and the passengers to fasten their seatbelts.
When the power supply is in “OK” position, if the seatbelt is not fastened, the seatbelt
not-fastening indicator will be turned on until the driver and the passengers fasten their
seatbelts; otherwise the indicator will be always on.
SRS fault warning indicator
■ When the power supply is in “OK” position, the warning indicator will be turned off after
a few seconds of self-test, it indicates that the airbag system is operated normally. The
warning indicator system is used to monitor the airbag ECU, collision sensor, inflator,
warning indicators, wiring, and power supply.
■ In any of the following cases, it indicates that a component monitored with the warning
indicator system is faulty, it is recommended to contact BYD Auto Authorized Service
Station for inspection as soon as possible.
● When the power supply is in “OK” position, the warning indicator will not be turned
on or be always on.
● The warning indicator is turned on or flashes during driving process.
To Next Page
Loading...
