■ If pressing the sunshade closing button and holding it, the sunshade will be
closed manually; if releasing the button at midway, the sunshade will stop at the
current position.
■ If the sunshade has been initialized, if pressing the sunshade closing button and
releasing it immediately, the sunshade will be closed automatically; if pressing the
button or the button at midway, the sunshade will stop at the current position.
Sunshade linkage opening function
When the sunroof is opened, the sunshade will be opened together with the sunroof.
Anti-pinch function
If a person or object is pinched during the closing process of the sunroof or the sunshade,
the sunroof or the sunshade will be opened automatically with a distance.
When opening or closing the sunroof, if a hand or head of a passenger is pinched, it
may cause extremely serious injury.
During driving process, if any part of head, hand or body is extended out of the
sunroof, if may cause serious injury or even death.
If the sunroof is opened in an environment below 0 ℃ or when it is covered by ice or
snow, it may cause damage to the sunroof or the motor.
Initialization method
■ If the automatic sunroof or sun visor function fails, attempt the initialization by following
procedure:
Sunroof initialization: Press and hold the sunroof OFF switch to run the sunroof to
completely closed position and hold further for 400ms.
Sunshade initialization: Press the sunshade closing button and hold it, to operate
the sunshade to the fully closed position and hold the operation for 400ms.
To Next Page
Loading...
