Cacamle IX-C62 User Manual

User Guide for the IX-C62 IP Phone
17
Basic Network Settings
There are 3 modes to access Internet: DHCP, Static IP address, PPPoE. The default mode is DHCP, it
will obtain IP address and other information automatically.
Note:
If your phone cannot contact a DHCP server for any reason, you need to configure network settings
manually.
To configure a static IPv4 address via phone user interface:
1. Press Menu -> Settings -> Advanced Settings (password: admin) -> Network -> Wan Port -> Static
Mode.
2. Enter the parameters: IP, Netmask, Gateway, Pri. DNS (primary dns), Sec. DNS(second DNS) in the
corresponding fields.
3. Click Save and restart the phone.
To configure PPPoE via phone user interface:
1. Press Menu -> Settings -> Advanced Settings (password: admin) -> Network -> Wan Port -> PPPoE
Mode.
2. Enter the parameters: User ID, Password.

Cacamle IX-C62 Specifications

General

Brand	Cacamle
Model	IX-C62
Category	IP Phone
Language	English