User Guide for the IX-C62 IP Phone
24
To change the language for the web user interface:
1. Click on Settings -> Preference.
2. Select the desired language from the pull-down list of Language
3. Click SaveSet.
Time & Date
The time and date are displayed on the LCD screen when the phone is idle. You can configure the
phone to obtain the time and date from the SNTP server automatically, or configure the time and
date manually.
Note:
If the phone cannot obtain the time and date from the Simple Network Time Protocol (SNTP) server,
you can contact your SNMP server or Internet administrator for more information.
To configure the SNTP settings via phone user interface:
1. Press Menu -> Settings -> Basic Settings -> Time & Date -> SNTP Settings.
2. Press or , or the Switch soft key to select the time zone that applies to your area
from the Time Zone field.
3. Enter the domain name or IP address of SNTP server in the NTP Server1 and NTP Server2 field
respectively.
To Next Page