5.2 CAENComm Demo
CAENComm Demo is a simple program developed in C/C++ source code and provided both with
Java and LabVIEW GUI interface. The demo mainly allows for a full board configuration at low
level by direct read/write access to the registers and may be used as a debug instrument.
Fig. 5.2: CAENComm Demo Java and LabVIEW graphical interface
CAENComm Demo can operate with Windows OS, 32 and 64-bit. It requires CAENComm and
CAEVMElib libraries as additional software to be installed (see § 4.2).
The Demo is included in the CAENComm library Windows installation package, which can be
downloaded on CAEN web site (login required) at:
Home / Products / Firmware/Software / Digitizer Software / Software Libraries / CAENComm Library
To Next Page
Loading...