Us e r 's GU i d e — 25
7i1/2+
11.5 INCH
6i+
17.5 INCH
3i3/4=
21.25 INCH
2. Access the Tape function:
g=
TTL = 21.25 INCH
3. Scroll from rst value to total:
+
01 4. INCH
+
02+ 7-1/2 INCH
+
03+ 6. INCH
+
04+ 3-3/4 INCH
+
TTL = 21.25 INCH
4. Scroll last two values:
-
04+ 3-3/4 INCH
-
03+ 6. INCH
5. Exit Tape function and add another value to your total:
=
TTL = 21.25 INCH
+
21.25 INCH
3i1/2=
24.75 INCH
USING THE MACHINIST CALC PRO
IMPORTANT: All examples are based on the default U.S. units
mode, displaying entries and calculations in U.S. units. Also note
that if an attempt is made to nd a solution (using the Machinist
functions) without having stored the minimum required values, the
calculation will not be performed. Instead, the currently stored value
for the selected function will be displayed. See Key Denitions
section for function requirements
.
KEYSTROKE DISPLAY
To Next Page
Loading...
Need help?
General
