Us e r 's GU i d e — 37
D
key or the
+
key. The
-
O
(or any other key).
Numeric Drill Size Entry
KEYSTROKE DISPLAY
OO
0.
1. Enter the Drill Size:
36D
36 DRILL SIZE
$
0.1065 INCH
2. Display the next larger available sizes:
D
2_75 MM DRILL SIZE
$
0.1083 INCH
D
7/64 DRILL SIZE
$
0.1094 INCH
D
*
35 DRILL SIZE
$
0.1100 INCH
* Repeated presses of
D
display the next larger Drill Sizes. The
+
and
-
keys will toggle forward and backward, respectively, through all
available Drill Sizes.
Letter Drill Size Entry
via Alpha Mode (
g 8
) and then storing it using the
D
key. The
desired letter can be selected by toggling through Alpha Mode
until the letter is reached or by specifying the numerical order of
methods are shown below.
(cont’d)
To Next Page
Loading...
Need help?
General
