Calculated Industries 4087 - CUTTING SPEED

Us e r 's GU i d e — 29
2. Enter the RPM:
800R
RPM $ 800.
3. Calculate the Feed Rate:
f
* FEED 3.2000 INCH/MIN
* Repeated presses of
f
will toggle through the inputs and outputs,
starting with the entered RPM (Spindle Speed).
Feed Rate – Based on Feed per Tooth, RPM and # of Teeth



RPM: 1000
Feed
Rate
Feed per Tooth:
0.005″
Number
of Teeth: 4
KEYSTROKE DISPLAY
OO
0.
1. Enter the Feed per Tooth:
5BF
FPT $ 0.005 INCH
2. Enter the Number of Teeth:
4#
TEETH $ 4.
KEYSTROKE DISPLAY
(cont’d)