Us e r 's GU i d e — 59
Standard
Standard
Order of Operations Method
* Depressing the Reset button located above the
C
key will also
perform a Full Reset.
APPENDIX B – PREFERENCE SETTINGS
The Machinist Calc Pro
o
, hold
down
*
, and press
O
), your calculator will return to the following
settings (in addition to those listed on the previous page), with the
* Depressing the Reset button located above the
C
key will also per-
form a Full Reset.
PREFERENCE OPTIONS
Resolution
– 1/64: displays fractional values to the near-
est 64th of an Inch.
– 1/2: displays fractional values to the nearest
half Inch.
– 1/4: displays fractional values to the nearest
– 1/8: displays fractional values to the nearest
8th of an Inch.
– 1/16: displays fractional values to the near-
est 16th of an Inch.
– 1/32: displays fractional values to the near-
(cont’d)
PREFERENCE SETTINGS DEFAULT VALUE
To Next Page
Loading...
