36 — Ma c h i n i s t ca l c ™ Pr o
(cont’d)
3. Calculate the Cutting Feed:
c
CUT 0.0200 INCH/REV
c
FPT
$
0.005 INCH
c
TEETH
$
4.
Cutting Feed – Based on Feed Rate and RPM
KEYSTROKE DISPLAY
OO
0.
1. Enter the Feed Rate:
15f
FEED
$
15. INCH/MIN
2. Enter the Spindle Speed (RPM):
800R
RPM
$
800.
3. Calculate the Cutting Feed:
c
* CUT 0.0188 INCH/REV
* Repeated presses of
c
will toggle through the inputs and outputs,
starting with the entered Feed Rate.
DrIll SIzES
The
D
be entered as a:
KEYSTROKE DISPLAY
To Next Page
Loading...
