Us e r 's GU i d e — 33
* Repeated presses of
C
will toggle through the inputs and outputs,
starting with the entered Diameter.
FEED PEr TOOTH (cHIP lOaD)
Feed per Tooth – Based on Cutting Feed and # of Teeth
0.024 Inch for 4 Teeth:
KEYSTROKE DISPLAY
OO
0.
1. Enter the Cutting Feed:
.024c
CUT
$
0.024 INCH/REV
2. Enter the Number of Teeth:
4#
TEETH
$
4.
3. Calculate the Feed per Tooth:
F
FPT 0.0060 INCH
F
TEETH
$
4.
F
CUT
$
0.024 INCH/REV
To Next Page
Loading...
Need help?
General
