Calrec M3 - DIL SWITCH SETTINGS - PQ5123 STEREO MIC INPUT CHANNEL

M3
...................................................................................................................................................................................
84
DIL SWITCH SETTINGS - PQ5123 STEREO MIC INPUT CHANNEL
Channel Insert Go signal can be taken either Pre
or Post fader, or bypassed altogether if not
required for use. The signal is always present at
the Insert Go connector in all conditions.
Insert - Pre fader SW 2 1 - ON
2 - OFF
3 - ON
4 - OFF
SW 19 1 - OFF
2 - ON
3 - OFF
4 - ON
SW 4 1 - ON
2 - OFF
3 - ON
4 - OFF
Insert - Post fader SW 2 1 - OFF
2 - ON
3 - OFF
4 - ON
SW 19 1 - ON
2 - OFF
3 - ON
4 - OFF
SW 4 1 - OFF
2 - ON
3 - OFF
4 - ON
Insert - Bypassed SW 19 1 - ON
2 - OFF
3 - ON
4 - OFF
SW 4 1 - ON
2 - OFF
3 - ON
4 - OFF
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
Standard default
settings