M3
...................................................................................................................................................................................
96
DIL SWITCH SETTINGS - DL3678-2 STEREO COMPRESSOR LIMITER
SW2 "M" detection:-
DOWN = OFF.
UP = ON = Detection of reduced mono
signal into side chain.
The compressor and limiter normally respond to the higher of the left and right
signals. SW2 allows the mono reduction of left and right (-3dB) to take control if
the stereo coherence is such that this exceeds left or right. This renders it
unnecessary to "under-drive" the stereo outputs to guard against the possibility
of a higher than desired mono level.
Standard default setting
To Next Page
Loading...
