CAME ZLJ24 - Encoder Deceleration Points; Encoder Slow Run Activation; M1 Motor Deceleration Points; M2 Motor Opening Deceleration

X 3
X 2
X 4
X 2
X 5
X 2
X 6
X 2
Pag.
20
20 - Manual code:
319U98EN
319U98EN ver.
2
2 06/2013 © CAME cancelli automatici s.p.a. - The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
Encoder Deceleration: this activates the opening and closing deceleration starting points.
M1 opening deceleration%: this adjusts the (M1) first motor’s deceleration starting point before the opening endpoint.
The deceleration starting point is calculated as a percentage (from 1% to 40% of a full gate run). See illustration on page 32.
N.B.: this function appears only if it is activated in the “decel. Enc” function in the ENCODER menu.
M1 closing deceleration%: this adjusts the (M1) first motor’s deceleration starting point before the closing endpoint.
The deceleration starting point is calculated as a percentage (from 1% to 40% of a full gate run). See illustration on page 32.
N.B.: this function appears only if it is activated in the “decel. Enc” function in the ENCODER menu.
M2 opening deceleration%: this adjusts the (M2) second motor’s deceleration starting point before the opening endpoint.
The deceleration starting point is calculated as a percentage (from 1% to 40% of a full gate run). See illustration on page 32.
N.B.: this function appears only if it is activated in the “decel. Enc” function in the ENCODER menu.
< Slow run Enc >
ON
Slow run Enc
< ON >
Slow run Enc
< OFF >
< M1 Slow.AP.% >
10
M1 Slow.AP.%
< 10 >
M1 Slow.AP.%
< 11 >
F
UN
C
TI
O
N
S
TIMING ADJ
.
US
ER
S
INF
O
ENCODER
I
m
p
.
R
u
n
F
UN
C
TI
O
N
S
TIMING ADJ
.
U
S
ER
S
INF
O
ENCODER
Imp. Ru
n
F
UN
C
TI
O
N
S
TIMING ADJ
.
US
ER
S
INF
O
ENCODER
I
mp. Ru
n
F
UNCTION
S
TIMING ADJ
.
U
SER
S
INF
O
ENCODER
I
m
p
. Ru
n
< M1 Slow.CH % >
10
M1 Slow.CH %
< 10 >
M1 Slow.CH %
< 11 >
< M2 Slow.AP % >
10
M2 Slow.AP %
< 10 >
M2 Slow.AP %
< 11 >