19
Sending Images
Multiple images can be selected and sent.
1
Press <0>.
2
Select [Send selected].
To select a size at which to send the
images, select [Resize image] and
press <0>.
Press the <U> key to select [Send
selected], then press <0>.
3
Select the images to send.
Press the <U> key to select the
images to send, then press <0>.
X <X> is displayed on the upper left of
the image to send.
You can also press the <I>
button to select an image in the three-
image display. To return to the single-
image display, press the <u> button.
After selecting the images to send,
press the <Q> button.
Sending Selected Images
To Next Page
Loading...
