26
Advanced
Functions
E
Choose to display the combination of functions set for the CUSTOM KEYS in
the viewfinder.
1. Turn the program selector to camera mode (a,
w
, b, c, e or f).
2. Open the camera menu and select CUSTOM KEY INFO.
3. Turn the information on or off.
4. Close the menu.
Notes:
• If it takes you more than about 5 minutes to select the Custom Key information, the
camera may turn itself off automatically before you finish. This can be avoided by
removing the cassette before you begin.
• You can only operate the digital effects when the CUSTOM KEYS are assigned to
the digital effect option.
• The camera remembers the Custom Key settings until you make a new selection.
• Even when the CUSTOM KEY INFO (information) is turned off, the settings are
displayed in the viewfinder for about 4 seconds each time you close the menu or
turn the camera on.
Displaying the Custom Key function in the viewfinder
To Next Page
Loading...
